Since 1989

Model 23 Type Holder

Home . . . Engraving Pages . . . Sublimation Pages. . . Rubber Stamp Pages  

Metal hand stamp

Manual Metal Stamp

Model 23 Type Holder 
Metal hand stamp

The Model 23 is used to stamp repetitive sequences on metal plates. Either by hand or by press, the Model 23 offers a quick alternative by stamping a uniformly spaced and aligned character sequence. Because the operator "sets" the type, virtually any sequence or code can be obtained.

A replaceable heat-treated steel anvil is used to support the base of the type characters. A type holding pin seats on a taper and prevents the notched type from falling out. During the marking operation, pressure bears on the replaceable anvil, rather then on the slot or pin.

The Model 23 is available in numerous sizes and capacities, which start at 4 pieces and then increase incrementally by 2 pieces up to 16 pieces, depending on character sizes. By choosing the proper capacity, the use of blank spacers to fill voids can be minimized. Thus, setups can be accomplished quicker and easier. We strive to maintain over 110 different sizes and capacity holders. Refer to our price list for different sizes and capacities.

The Model 23P is equipped with a 1" diameter 1-1/4" or 2" long shank for use with most hand or power presses. For presses requiring a special round shank, consult the price list. For any other shank shape, request a factory quote. This machine is also equipped with an optional standard dovetail shank, which is recommended for use in Numberall's hand or power presses. By using the shanks outlined in the price list, the Model 23P can easily be adapted to our various platforms or stamp holders.

Metal hand stamp

Advantages of Model 23:

Easy to use

Heat-treated high-grade alloy steel construction

One-piece hand shank frames

Vinyl-coated hand shank to absorb shock

Replaceable hardened steel anvil

Custom multiple lines and extra capacity available

Press style model to adapt to most presses

Metal hand stamp

Type Size	Holds 4 pcs. of Type	Holds 6 PCs Of Type	Holds 8 PCs Of Type	Holds 10 PCs Of Type	Holds 12 PCs Of Type	Holds 14 PCs Of Type	Holds 16 PCs Of Type
1/16"	$ 330.50	$ 338.50	$ 347.50	$ 354.00	$ 357.50	$ 371.00	$ 396.50
3/32"	$ 338.50	$ 351.00	$ 357.50	$ 378.00	$ 395.00	$ 400.00	$ 417.00
1/8"	$ 347.50	$ 357.50	$ 381.50	$ 398.50	$ 417.00	$ 434.00	$ 480.00
5/32"	$ 354.50	$ 378.00	$ 398.50	$ 418.50	$ 442.50	$ 464.50	$ 516.00
3/16"	$ 400.00	$ 430.50	$ 457.50	$ 481.00	$ 515.00	$ 537.00	$ 570.00
1/4"	$ 430.50	$ 466.50	$ 514.50	$ 537.00	$ 573.50	$ 618.50	$ 660.00
5/16"	$ 471.00	$ 515.00	$ 565.50	$ 610.50	$ 660.00	$ 704.00
3/8"	$ 514.00	$ 568.00	$ 619.50	$ 682.00
1/2"	$ 591.00	$ 668.00	$ 741.50

Metal hand stamp

Steel Type Fonts

Numberall's steel type can be purchased in individual pieces but is also available in fonts, allowing you to have multiples pieces of each letter, number, symbols and blanks at your fingertips. Refer to the following chart for complete character break down of the 3A and 5A Fonts, showing which characters and how many of each character are included.

Metal hand stamp

Type Size	3A Font 100 PCs Of Type	5A Font 152 PCs Of Type
1/32"	$ 1,122.00	$ 1,686.50
1/16"	$ 1,028.50	$ 1,545.50
3/32"	$ 947.50	$ 1,424.50
1/8"	$ 947.50	$ 1,424.50
5/32"	$ 1,028.50	$ 1,545.50
3/16"	$ 1,171.50	$ 1,762.50
1/4"	$ 1,311.50	$ 1,972.50
5/16"	$ 1,668.00	$ 2,508.00
3/8"	$ 1,968.00	$ 2,961.50
1/2"	$ 2,345.50	$ 3,529.00

FREE OF CHARGE!

A DELUXE WOODEN TYPE BOX, with lid and sectioned compartments for easy storage of type pieces and a handy magnetized tool for handling type pieces is supplied with each order for our Model 23 type holder.

Metal hand stamp

To compliment the Model 23 Type Holder and aid in organizing Numberall's super quality steel type, a deluxe wooden type box and magnet is supplied with each order for the Model 23 and/or type font. The type box is designed with a separate compartment for each character, allowing for easy storage. A handy magnetized tool is also included for handling type pieces and easy removal. The box has a hinged lid with clasp, as well as room for most type holders. The No. 1 small-size box is used for type up to 5/32". The No. 2 large-size is used for all larger type.

 

Metal hand stamp

Variations of the Model 23 Prices by quotation only

The Model 23 Type Holder can be modified in many ways to suit specific marking situations. Hot stamping or extended capacity can be easily accomplished. Multiple lines, with or without partition walls, can be manufactured. All multi-line type holders utilize set screws instead of type holding pins. If type holding pins are required, a partition wall is required and must be stated at time of ordering. If not stated, partition walls will not be used. Contact our sales engineers with your requirements for a quotation.

..........  

GoTo: Blank Tag Pages 

Home . . . Engraving Pages . . . Sublimation Pages. . . Rubber Stamp Pages

.
Advance Payment Required.
No Returns Allowed on Custom Products.
25% Restocking Charge on Returned Stock Items.
Returns must be within 10 days of delivery and have an RMA number.
Call 626-333-2450 for your RMA number.

* Bates is a registered trade mark of General Binding Corporation.
Reiner is not affiliated with Bates.  
*Garvey® is a registered trademark of Garvey Products.

Short Order Products
P.O. Box 5488 ~ Hacienda Heights, CA 91745
phone 626-333-2450 ~ fax 626-333-2049